Skip to main content

14 replies

Stainless Steel 180 degree headers

rmccallrmccallMember
I am currently tooling up to make a run of stainless 180 deg headers and was trying to get an idea of the sort of interest there is.
The current design is exactly like the ones that I have pictured.( the headers in the picture are mild steel and are ceramic coated) They will have 8 individual tubes with slip on "merge" style collectors and V-band flanges for muffler attachment. They will be for 351C and 351W engines with the Windsor tubes being 1 3/4" and stepping to 1 7/8" a few inches down stream.
The price will be $2950+ shipping with an additional $400 fee if you would like them to have a mirror polished finish.

Thanks,
Ron

Attachments

Hide
Images (1)
  • KIMG1352-2
Original Post

Replies sorted oldest to newest

panterrorpanterrorMy 74 GTS
quote:
Originally posted by r mccall:
Here is a picture of a set made for the 351W.

Ron


Nice work Ron. Did you do the welding? Is it 304L or 321 SS? I noted in the previous post the primaries were were stepped 1.75 to 1.875. The previous picture of the set installed in the Pcar had the V-Band clamp between the expansion cone and muffler instead of at the merge as pictured above. What diameter are you planning at the merge and expansion cone?

Best,
Kelly

Add Reply

Views: 291
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×