|
quote: Originally posted by MARLIN JACK:
...'Hall Pantera' use to have them in their Cataloge, but that was a few Years ago...
Yes, about a year ago I got one from Hall...it is fiberglass. But if you are not running AC, I wonder what that area may look like all sealed up and smooth?
|
| |
| Posts: 965 | Location: Southern CA | Registered: September 06, 2003 |  |
|
AmeriSport
GT5-S builder
Pantera Parts Vendor
|
quote: Originally posted by roofit7774:
Does anyone know who sells a vent to replace the rear grill?
Are you talking about the AmeriSport AC replacement louver? Kirk
.jpg) |
| |
| Posts: 67 | Location: perrysburg,ohio,usa | Registered: October 17, 2003 | |
|
AmeriSport
GT5-S builder
Pantera Parts Vendor
|
quote: Originally posted by Mic:
How do you install the vent, Kirk? do you have to remouve the air con. ?
You have to remove the AC condenser shroud from it's position---not pull the hoses---to expose the original screen's nuts. Pull the nuts, drop off the original screen and install the new louver. I built this part originally in 1981 (into production shortly after) so it did not look like the car had a big square hole in the back from a distance. |
| |
| Posts: 67 | Location: perrysburg,ohio,usa | Registered: October 17, 2003 | |
|
WANT GROUP 4 LIGHTS?
I SELL THEM!
Genuine OEM, not reproductions
Click HERE for info
|
quote: Would that allow for the Heated Air to escape more efficiently?...
Normal air movement direction, from the AC condenser fan, is to PULL the air into the condenser, not blow it out. So normally, air is not escaping at the grill, but going in. Larry |
| |
| Posts: 2460 | Location: Fresno, California | Registered: February 26, 2005 | |
|
