DeTomaso Internet Community
Forums Summary Page
Technical Support Forums
ZF Transaxle Forum
angle drive for speedo|
Go
![]() |
New
![]() |
Find
![]() |
Notify
![]() |
Tools
![]() |
Reply
![]() |
|
|
|
My angle drive is broken. The tabs are busted off. Can I drive the car with the angle drive removed while I wait for a new one or should I put it back on?
Thanks Doug M |
||
|
|
|
Yes. As long as you don't remove the bolt that holds the gear housing into the trans.
Ron |
|||
|
|
|
You may get a small but messy lube leak from inside the stub where the angle drive fastened. As Ron said, that little 10mm bolt directly below the angle drive retains the extension gear-shaft for the speedo inside the trans. Removing the bolt will allow the extension shaft and gear to drop inside the box, and there's not much room in there for a 3" long piece of hardened steel! Major damage will result if the shaft drops and you attempt to drive the car! THere should be a small tongue on the end of that extension-drive showing that spins the angle-drive. If there's no tongue showing now, DO NOT DRIVE the car!
|
|||
|
| Powered by Eve Community |
| Please Wait. Your request is being processed... |
|

