Skip to main content

Replies sorted oldest to newest

Depends.

There are two of the ZF-mounted angle drives and two tach-speedo units:

VDO and Borletti

Both must be installed as a matched set.

They are not the same ratio.

Believe the back of the tach has the needed information to enable you to get the proper angle drive.

Hopefully someone else will chime in with more details - I can't find the info I have.

Larry

Attachments

Images (1)
  • Screen_Shot_2017-10-23_at_7.12.21_PM
quote:
Originally posted by GT4Peter:
Thanks! A silly question : Veglia Speedometer is based on VDO ?
How can I know what fit in my zf ?
I have no original parts. Only the speedometer from Veglia and the zf .
Thanks

This is a picture of the gear reduction unit. You receive about 2' of new cable with it, one end plugs into your Z.F., then you just plug your old cable into the back of the reduction body.

Attachments

Images (1)
  • ASRG

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×