Reply to "351C complete motor ..."

accobraMember

The motor was rebuilt as stock by someone else before I purchased the car they stated and appears correct about 5k miles ago. When I removed the heads there was no ridge on the cylinder walls and they still had a trace of the cross hatching from a hone, I pulled one cap and the bearing looked new. I could pull a head and check the bore .. it appeared to have after market flat tops and if I remember correctly .030 over sized. The motor ran very strong. High Perf in the motor is limited to the Comp Cam FC268H-10 and the torker intake .. the aluminum water pump goes with it ... shipping I will pallet it up and ship it airport to airport via FOWARD AIR.

4/15/092:36 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...