393C Stroker Recommended Cam

rumblebeeMember

I'm not sure if this is the right forum for this, but here it goes. I was curious if there was a recommended cam spec for hydraulic roller cams similar to the George Pence cams I keep hearing about on the vintagemustang forums. I have a 1970 Mach 1 I recently bought that I am planning a 393C Stroker build for. It is going to be 75% street/25% track.

1970 2 bolt block bored .030"
3.85" SCAT 9000 Cast crank
SRP Forged Flat Top Pistons
Melling M84A Oil Pump
Milodon Oil pan with windage tray
1970 4V Closed chamber heads mildly ported with 3 angle valve job
1.73:1 roller rockers

3.55 Posi rear
TKO 600 trans

Hoping to make 500hp+ on pump gas. I am still in the planning stage of the build, and have only dropped off the block at the machinist for work. I'm new to Clevelands, most of my experience is from building Chevy LS motors, so any suggestions for improvement is also appreciated.

11/24/173:17 PM

Original Post

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...