Skip to main content

Reply to "4 row condensor vs. stock 3 row"

I still have to send the pictures, Damn modern technology, I got my computer working took several pictures and the floppy disc was corrupted!!! Anyway, I believe changing the routing through the console should be fairly easy. The hoses pass through an oblong hole behind the passenger seat curve through the console under the radio and up to the evaporator. If I were doing this job I would look at one of the bulkhead manifolds that the a/c guys sell and mount that to the firewall and use o-ring fittings on each side.

As far as mounting the a/c hoses through the inner fenderwell, it is a piece of cake! The only modification needed is to make a hole large enough to run the 2 hoses. I also ran the tailight loom through this hole. Again, I would probably use the manifolds here too if I had seen them before I had my body guy enlarge the hole. I used stainless steel braided barrier a/c hoses that look pretty trick but were big $$$$'s. I can send pictures of this also (soon as I resolve the technology issues mentioned above)

Gary
×
×
×
×