Skip to main content

Reply to "Seeking advice regarding component selection for an 8 stack E.F.I. induction"

davidnunn posted:

Randy, here’s a pic of some standard Borla throttle bodies. You’ll notice they are significantly shorter than the Weber style TB’s. Car is a ‘56 Lincoln. 

1E351C20-40D4-4DDF-9091-CA52EF39FC6B

Re: non-boosted brakes - I tried simply eliminating the booster but my pedal was just too heavy. I believe the problem was, the Pantera’s brake pedal is too short to give adequate leverage. SACC has a Wilwood pedal kit which gives the correct leverage for non-boosted brakes. 

Thanks David, those do look much shorter. I'm still trying to find the measurement from the block china rails to the bottom of the decklid. As for the brakes, I have already adapted Wilwood pedals to my car using a universal mount I picked up from Speedway Motors. I had to do a little surgery but I think it will work.

pedals8pedals5pedals4pedals2

pedals

Attachments

Images (5)
  • pedals8
  • pedals5
  • pedals4
  • pedals2
  • pedals
×
×
×
×