A/C help needed

I've replaced my system with R134a moving the condenser to the front of the car,  Sanden compressor and all new components from Vintage Air except for the Expansion Valve which came from Nostalgic AC.  Evaporator is OEM and was flushed thoroughly. Trying to charge system have added approx. 3.5 cans of R134a however no cold air.  High side reading just over 200 psi  low side is still showing vacumn.  Have temporarily taken the anti icing switch out of the system and running power directly to the relay to engage the compressor.  There is a Trinary switch in the system which when hooked up as instructed does not seem to do anything.  Initially had a leak in the system but that has been resolved.  Anyone have any clues as to what might be happening here and a possible solution?

 

Original Post
×
×
×
×