Skip to main content

Reply to "Planning on blacking-out the trim"

Not that it hasn’t been done, but I am not aware of anybody who has changed all of their stainless trim to a black-out look by using vinyl.

I would be concerned about the vinyl edges remaining firmly attached; seems adhesion would certainly be a problem with the over the door drip-rail SS.

A word of caution regarding the windshield rubber gasket trim. Do not attempt to pull that trim out. It must be installed and removed as an assembled unit - Glass, gasket and trim - due to the method that the trim is anchored, using a J hook, into the rubber gasket.

Larry

×
×
×
×