My new clutch master failed. The fluid seemed to be turning black so I flushed it a couple of times. Then I took it on a fairly big outing to Full Throttle Panteras open house. The fluid was perfectly clear when I started the trip. About halfway through the trip during some spirited driving the clutch master begin to fail. When I held the clutch down, it would gradually release itself. I was able to complete the trip and make it back home but maneuvering in parking lots was very difficult.
After arriving at Full Throttle, I inspected the fluid and it was very black. The next week I removed the failed master and showed it to Wilkinson and explain what happened. He asked which brake fluid I used and I said it was DOT3. He said it has to be DOT4 and set me up with a new one. I have that in the car now. So far so good, but time will tell.