Reply to "Seeking a source for an affordable carrier bearing removal tool."

rmccallMember

Ace,

That is why I had asked if the trans in question was a -1 or -2. The -1 diff separates where the ring gear bolts on. The -2 separates at the small end. Take the (8) M8 bolts out, separate the cover from the main diff, lift the diff out ,then the cover. Cut the outside cages off, grab the inside race with a bearing separator and press off the inside race.

-1 gets a but more complicated.

Ron

6/16/197:51 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...