Wow, thank you very much for your advice and "tuning me up" on this. I will indeed take your advice and make the suggested mods, with the acception of.. I have a flow cooler water pump with the anti cavitiation backing plate. I did purchase the SS tubes, I had Bryan McCulloch (spelling?) make me a radiator which is a beautiful looking core ( as seen in a post http://pantera.infopop.cc/eve/forums/a/tpc/f/5650045562...360079675#9360079675 ). I also leaned the rad forward to improve air flow which I may move back again should I decide to relocated the condensor. As far as the two tanks go, I did find a pinhole in one tank ( see burn marks at bottom) along with a few old repairs. I will have consider exactly how to approach the cooling tank (s) issue ($). I guess I will start pricing new tanks as I attempt to do a nice air tight weld on the old one. I will confirm the thermostat also. So just to be clear, ( I'm not only ugly but I'm kinda' stupid too) When you say "swirl tank" you are refering to the smaller tank, yes? Iliistration 11, #28, page 35 p/n 11023A "Tank Pressure" ??... You want this cap welded up and an air bleed at top?... Thank you for your expert advice, I can see now new tanks are in my future...
Attachments
Images (1)
