Skip to main content

Reply to "Seeking advice how to best prep and paint the inner cowl area."

The front cowl is essentially a water gutter. Clean it up and spray Flex Seal in it. When the grills are on you won't see any details in there. Don't get it on any of the wiper mechanisms. Best to take them out and reinstall them when you are done working in there.

I don't know if there will be an issue with using it over unprimed steel sheet metal. That's an unknown. However I personally have had success with using Rust-o-leum primer on bare metal in the past.

The benefit to the Flex Seal is that if you have holed through in spots from rust this stuff will seal that up.

×
×
×
×