Reply to "Fuel pickup sender Need any new tips for install"

huskerMember

Also, be VERY careful bending the arm as it is brittle. I wasn't willing to risk it. In my case the float rubbed against the side of the tank. I bent it just enough to clear the side. I filled an empty gas container a gallon at a time, marked the container and then pumped in a gallon at a time (used old electric fuel pump) while watching the fuel gauge. I also measured the resistance of the fuel sender. My gauge read half full with 15 gallons. There are a couple of threads covering this.

5/5/233:55 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...