quote:Originally posted by comp2:
Good point. Not likely. If the overall diameter is not too big an adapter would not be hard to make.
I've seen this sending unit installed on a Pantera and always wondered where it was sourced. It's got the correct ohm rating to match the factory and my aftermarket VDO gauge. I've had trouble with installing the factory replacement sending unit. The vendors get it through the same source and none are calibrated so you have to try to bend tha float arm yourself. I gave up after the last one I changed would show empty after the fuel level fell below half tank after several attempts to calibrate it. On my last trip, I just checked my odometer and made a mental note to fill up every 200 miles.
When I bring my car back from Vegas, this will be one of my first projects. Using Centroid's Fuel Level Sender should be the final solution in getting an accurate fuel level reading. Too bad it doesn't have a built in fuel pickup though.
Edit: Found the pic of one mount on a stock pantera gas tank using an adapter.
