I straightened the panels with a propane torch and a sponge on low heat. Then a body hammer and dolly.
The rears were 7" past the stock panel ..I cut them back 1" and then added 1" spacer .. the spacers were made with so they center on the axle and center inside the wheel with 1/2 bolts threaded thru the axle. It will be fine .. my other choice was to TIG the spacers to the wheel ?
No pics of the lights ..an Audi 2001 side light.
Ron
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.