Reply to "I left the ignition on"

tomkuesterMember

the last item that needed replacing was the ignition module. It required pulling the distributor apart, gear removal and all. The hard part was putting the distributor back on the motor, it's no small task with Webers.

I don't believe I'll make that mistake again.

The problem started with trimming a corrugated plastic sheet pattern for a single side window. I had to remove the sheet time and time again, trim it further. fasten it to the window lift mechanism and run it up and down until it fit perfectly. I managed to bend this material to the correct curve.

Now I plan to build the same window pattern in 5/16" clear plexiglass, bending it to the correct curve a Pizza oven. I have to learn about plastics for the best material to use.

Attachments

Show

9/18/229:01 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Attachments

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...