Skip to main content

Reply to "Keys"

If you are correct, you have something that I have never seen before. But I do not believe you are correct.

refer to my photos previously posted and you will see that the ball portion of the joint is definitely located on the gray pot metal piece at the rear of the lock cylinder. I strongly suspect what you think is a metal tip to the rod is in fact dark plastic. If both pieces are metal there is going to be a lot of difficulty in ever getting them to properly connect. Since this is a part of the car that is very seldom modified it is unlikely someone has transplanted a part from another vehicle.

if you have any plastic trim removal tools that incorporate a V slot, like the back of a claw hammer, they may assist you in popping the joint apart

Larry

×
×
×
×