Skip to main content

Reply to "Leak >>> Gaskets ?"

Angelo,Thanks for your answer

1 : On valve cover breather, gasket is not missing. I took it off for the picture. But in my opinion this whole piece is very loose, when I took it off it was very easy to do so. I just had to turn the aluminium cover 1/2 tour, we can see on the picture how it's fix on the valve cover.
The gasket is not even tight between the 2 surfaces.

As you say, the leak could come from there and also from the other side : PCValve



I have only one hose on passenger side going to the carb, no hose on the driver cap side, this a
is just a aluminium cap. I understand it's better to make the right circuit, I will start to look for parts.

I am going to clean the engine, put a piece of tissue on each valve covers. Take a ride : if oil is on the tissues and not all over the engine....I will know.



PS : I have already replaced the accelerator cable yesterday but just with a regular cable, it's already a lot better but I will certainly change it again for the last series.
Last edited by cayman
×
×
×
×