Reply to "New heads, new intake, new rockers, new pushrods - Very noisy valves and very little oil through pushrods"

plt-1Member

You can look at the location of the oiling ports in the lifters and make sure they are clearing the lifter bore.

Did anyone measure your pistons?

Pull the intake and look at the bottom of the lifters, run a magnet over your oil and cut your filter.

Edit: That's out of order... run a magnet over your oil, cut the filter and if you see bad news, check the lifters.

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...