Skip to main content

Reply to "Replacement Brake Master Cylinder Lacks A Sleeve Shaped Push-Rod Guide"

Ok Bill , here's some of what I've found out having bought the same part , it's possible to get a replacement w sleeve from a vendor in Germany . Haven't yet found out if what we bought will work as is . I don't think so for a couple reasons . So what I did is took the original master apart , removed the sleeve , cut it off the primary piston then ground the end down until it fits nicely into the replacement master that I bought without the sleeve .If your interested I could be more detailed on what I did . Haven't yet installed it . What I didn't do before taking the original apart was measure how far the sleeve sticks out from the body of the master . Perhaps you could give me that number if you've got a original around .Thanks 

×
×
×
×