Reply to "Replacement Brake Master Cylinder Lacks A Sleeve Shaped Push-Rod Guide"

dipascaleMember

Hi gvillbill,

1. the bolt between the two ports hold the secondary piston in place, only remove it to replace the pistons seals (see machining in the secondary piston).

2. the pushrod must be adjust with a clearance 0.035 to 0.045 in (see attachments)

7. you have to pull hard enough to remove the tank because it's clipped into the 2 seals, to put it back, I put rubber grease to facilitate reasembly

8. fill cap orientation doesn't matter

sorry for my bad english.

Attachments

Hide

Images (2)

11/17/229:58 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Attachments

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...