Skip to main content

Reply to "Pantera from 1974 - Fuel Easiest way to create a return fuel line?"

@bryske posted:

What fittings did you use for the drain-plug hole? - I'll bought them in advance then. Also buy the Moroso kit as backup solution.

I used a Setrab M22 x 1.5 high-flow banjo fitting with a -8 AN outlet. Setrab products are made in Sweden, so it's probably easier to find this in Europe than in the USA.

Also, the "extra bung" Julian referred to is obvious in two of your photos. It has an Allen head set screw threaded into it. Just remove the set screw and buy a fitting the same size. Just make sure it's large enough for the Sniper's return line. If you are going to use this bung or a return fitting in the filler neck, there's no need to draw fuel from the bottom of the tank. You can use the OEM fuel pickup.

Bryske

Attachments

Images (1)
  • Bryske
Last edited by davidnunn
×
×
×
×