Reply to "Pantera Front Cut"

And a Solidworks picture of the new nose structure.
Should receive this in a couple of days time from the laser cutters & we will weld it up.
The green tubes you see in the lower crossmember are for access to the lower suspension arm bolts/nuts, so a socket can be passed through the hole.
The hole in the centre of this cross member will have a tube welded through & will become a towing point.
The plates where the hood hinges are located have the same curve as the hoods nose.
We will make all of the front body work on the english wheel, (with a few detail changes such as removal of the indicator pods, removal of that horizontal box that juts down below the grill & intergrate a new spoiler).
Ahhh the work I create for myself !!

regards,
Tony