Skip to main content

Reply to "Pantera Spreader Bar - Engraving"

We have only worked on the anodized ones to this point. I believe the polished ones are not chromed, so upon completion, they ought to look like the one in this picture.

I have talked with my machinist, and asked if there is a way to flatten out the cut, and polish the inside of the letters, as shown on the PIM picture.

The basic engraving works well because the contrast between the anodized black, and the cut aluminum is pretty apparent.

Scroll Down for Polished Spreader Bar...

I'll get more info for you....

Rocky
Last edited by rocky
×
×
×
×