Skip to main content

Reply to "Parking Brake cables - question"

Adrian, as far I can remember the cable is asymetric due to the asymetric position of the hand brake lever.  I played witht the cable right/left a bit to figure the best fit under the car/gear box. Mechanically the cable is a "rope" which is beeing pulled, forces on both sides are the same..as far I can recap from the old mechanic static lessions. 

Also Wilwood hand brake calipers incl. mods are nice vs the stock Peugeot stuff..(I have them installed)

Matthias

Last edited by matg
×
×
×
×