Skip to main content

Reply to "Seeking Information Regarding Rear Emblem Placement"

I was in a hurry - packing to go out of town but here is what I got.  Caveat - measurements with decimals were made with a "high precision" Harbor Freight Pittsburg dial caliper.

I measured to hole centers.   Topmost  vertical measurements made with caliper jaw on top lip of tail panel.  Horizontal measurements are with the jaw eyeballed at the point the tailpanel radius begins to create the tail light recesses.

This is chassis 1418 an early 1971.

20190131_115126

20190131_115138

Attachments

Images (2)
  • 20190131_115126
  • 20190131_115138
Last edited by George P
×
×
×
×