Skip to main content

Reply to "Rear stock 15” Campi’s not fitting Wilwoods"

Thanks so much for the info. Great ideas! I determined after taking it apart and reassembly ad nauseam, that the 5mm were the closest for the rear. No spacers needed on the front. The instructions say to sand the brake caliper. I think that's poor engineering to be honest. I mean come on it's an e-brake caliper. They couldn't just give us a solid 1/4 inch space?! I hate to have to modify the "aesthetics" of the brakes that were supposed to be designed for the car. I've heard that there were a few molds for the wheels? Not familiar with magnesium, but do they cast that? Just bummed I have to remove nearly all the red paint off of one brake caliper, and then Wilwood tells me they don't sell a touch up paint for it b/c it's powder coated. I realize it doesn't effect the functionality of the brakes, but still pretty shocked after installing Wilwood on multiple other vehicles that I'd have to "modify" them b/c they only fit "most of the time". They have been providing Wilwoods for Pantera for a while... why not modify them for 100% of the stock wheels or is that not possible? My OCD will find a matching color eventually unless someone already knows it. Bare metal needs to be covered to prevent it from rusting in my mind.

Last edited by USCDOC13
×
×
×
×