Skip to main content

Reply to "Replacing Master Clutch Cylinder"

Using a small c-clamp and closed end of a box wrench, couldn't get a small socket to fit, tried to press the rod/pin out of the clevis....no luck. Totally frozen in the clevis/clutch pedal hole...will not budge. Going to carefully heat the rod with a torch and let cool to see if that will help loosen the rod. If that doesn't work will try to cut out.....I looked at removing the whole assembly and would be very difficult. I believe I would run into the same problems when trying to remove the other pins/rods for the brake and accelerator pedals...

×
×
×
×