Reply to "seeking help for Oil dip stick path through"

matgMember

ok I see UNDER is hard to do and has the issue wit the valve covers, unless I can bend the new pipe in an S shape so it ends up between valeve cover and intake, not much space left. I will do some more experimenting.

Also I think I need to cut the pipe in 2 parts, one going into the block and then the rest. The "ORIGINAL" was also in two parts, where the upper part was fixed at two locations one on the Head and second as per figure above from 4273xx. The lower part has today an edge so it does not sink fully into the Block/Oil pan.

6/18/2010:19 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...