Reply to "seeking help for Oil dip stick path through"

matgMember

Tx Larry..

spot on!!!....I left the lower end of the original 10" pipe portion in the motorblock/oilpan. Just added the top. In my case the portion in the block was already a loose part. Good for me. To level the two pipe openings I added the braz ring (In picture left side) on my fabricated pipe. Works nicely. Until today I had only the 10" pipe portion in the block and added a fitting screw to close the hole.

..now comes the seat belt crap ..setting it up on the firewall vs the rockers...an other custom build required..

Matthias

6/23/2012:53 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...