Reply to "UDPATE - Stalling like it's out of gas... but tank is full."

rene4406Member

Before going all over the place from "mine did the same and it was ....." already start by knowing if it's a fuel or ignition problem.
So, when it has just died, remove a spark plug and see if it is dry, which indicates a fuel problem, or wet which indicates an ignition problem.
To confirm, you reconnect the wire to it, you press it against an unpainted metal part of the engine, you operate the starter and see if there are sparks. It's much easier to do with someone's help.
If there are good quality sparks, ie blue, you can eliminate all electrical faults and search in the essence circuit. If there are no sparks, or of poor quality, i.e. orange or white then you can look on the side of the coil, connections etc...

1/23/234:36 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...