Those 18/4’s do have „bumps” on the outside, their sole purpose to be able to add a brand name or logo to the caliper.
Those bumps do add a 3mm per side.
But one has a problem - oho, my calipers are way to wide, and I want to reduce their width as much as possible.
You have a talk with BG, and they say - machine those bumps off, as they are of no use for you.
Me no have machines at my disposal, but two good hands, and lots of hand tools :-)
You take a handsaw, and saw slots in the bump
Once that done, you knock what’s left off by use of a chisel and hammer - easy thingy :-)
Then, the filing starts...
Start with a rough one, end with a fine one…
Almost done :-)
Time for sandpaper…
Fel free to check straightness with a ruler!
The very same caliper repainted after I had the mid section modified too.
More about that later...
Getting things like this done with basic tools, and by hand, I love it!
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.