quote:What is the secret to removing the cable assembly from the wiper motor? It is attached with a nut threading onto the motor housing. Once the nut is removed, the cable assembly still does not want to come off.
On the picture you see the inside of the motor, the cable assembly/"push rod" is fixed by the lid/motor cover per 4 screws, and adjusted per the big nut at the end.
Not sure if you can take the MOTOR out and leave the cable/Push rod in place. I removed everything for overhaul.
What T. Solo is saying is probably the best. Get the Wiper arms off..per a small piece of wood used as lever. Then you can pull everything out motor incl the push rod/Cable assembly. The wiper studs stay in place. Same way to get it back in.
Pic 1
