Skip to main content

Replies sorted oldest to newest

I have been doing a quite a bit of 3d printing. There is a wide variety of what people can do 3-d printing. I am surprised how how difficult some things can be. While it seems to be a good solution for one off individual items, Making things for consumption can be a bit difficult. Some things don't print well. The surface is often less than....production quality. The plastics often not appropriate.

Often the part needs more hands on attention to get right than some realize. Once the part is made a mold can be made. With a mold, a part can be casted of different materials. LOTS of opportunities!!:



Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×