Must mount 6 point belt in Panteran. Has mounted a cage. How have you done?
Attachments
Original Post
Replies sorted oldest to newest
Is this the cage you have installed?
I would recommend to install a horizontal bar for the shoulder mounting points (like I did on mine). I wouldn't trust the original firewall, if this is for racing application.
Attachments
Install a horizontal bar within the roll cage as suggested or use the harness bar available from vendors, however if using that in a racing application I would add fastening bolts through the firewall toward the inside of the seat at either side of the engine access hatch. The existing sill mount should be strong enough for the lap belt, you may need to strengthen the inner floor mount point. I would mount the submarine belts to the rear seat mounting points or the same as the lap belt.
Of course it is always wise to check with the sanctioning body you will run with as to what is acceptable and regulated.