Skip to main content

Hello everyone! Getting ready to do my front breaks and I found this Baer Break kit.

https://www.baer.com/products/..._kits/parts/4261410R

Has anyone tried this Baer Brake Kit? It's a great price and it looks like it comes with everything you need to swap over to Baer front breaks. Just wanted to see if anyone has done this swap? If so, how's it working out for you?

Original Post

Replies sorted oldest to newest

I took a quick look, but wasn’t certain this was optimized for the Pantera…  I didn’t see anything specifying that when I followed your link…

1) How do the rotors/hubs integrate with the Pantera spindles & bearings?

2) Are the spacers the correct thickness that you will need?

3) Is the rotor diameter correct?

I’m not sure if anyone has used this kit…. MAY be interesting to investigate (tested) offerings from some of our vendors…

(But if this is a good setup for our cars, it looks like it contains top-notch components!)

Rocky

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×