Skip to main content

Windshield Gasket (still soft) and about 10-12' of new, straight gasket material $80 (plus shipping)...  It's in two pieces, an upper corner (and half) and a lower corner (and half).

If you buy it, I'll throw in this shorter (about 4') length of smaller material - you can line a part of the decklid opening?



Windscreen_Gaskets [2)

Windscreen_Gaskets [1)

Attachments

Images (2)
  • Windscreen_Gaskets (1)
  • Windscreen_Gaskets (2)

351 Cleveland Builder’s Kit

Build yourself an accurate replica of a ’71 Pantera Motor, or a fire breathing stroker with this set of great condition parts!  The majority of the parts to build your engine are included for one low price!

Parts are for pickup in the Tucson, Arizona area...  Due to the volume / weight of all this, it's too much to ship.  MAYBE arrangements could be made to get them to SoCal at additional cost.

BASIC REQUIRED PARTS:

351 Cleveland Block: 2 Bolt Main, Bored .030, honed.  Needs a wash and minor cleanup.  New freeze plugs and ail gallery plugs.  Looks like new cam bearings.  Mains are 2.950”

Crank (4MA): Good condition - needs minor cleanup. 2.748” Mains, 1.310”

Heads: Date matched D1AE GA High Compression (quench) heads.  Valves (Ford) and dual springs installed, with keepers.

Intake: Choice of Edelbrock Performer LB 351-4V intake (aluminum), or one of two Ford cast iron “period correct” spread-bore manifolds (details on request)

Valve Covers:  Chromed stock Ford valve covers.  A series of alternative options (DeTomaso, Ford, Ford Motorsport) available for additional charge.

Oil Pan:  Beautiful stock Ford blue oil pan.  Looks brand new.

Engine Stand:  Harbor Freight stand included with block

ADDITIONAL ITEMS (Additional Cost):

  • Ford 400 2V Air Cleaner (top & bottom) – needs a different sticker
  • Flywheel G5AE-E  (164 tooth)
  • Pantera dipstick tube assembly and dipstick
  • NOS “Antler Ears” original headers – in Ford Boxes!
  • Pantera Water Pump and back plate
  • Balancer: Choice of D1ZE-6316-AB or DOAE-6316A1
  • Pantera Air Conditioning Compressor Bracket and Idler Assembly
  • Powdercoated 1 groove water pump pulley (black) – like new
  • Powdercoated 2 groove crank pulley (grey) – like new
  • Alternator Adjuster Bracket (like new)
  • Timing Pointer
  • Rear engine intermediate plate
  • Chrome Fuel Pump – updated with AN Fittings (in/out)
  • Coffee Can with misc. bolts and parts for build

All parts in good or very good condition, but some need cleanup.  You won’t find a better basic setup for an engine build.  PM me (Rocky) for pictures and more information.

Last edited by rocky

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×