Skip to main content

Thanks for the heads up. Things are going very slow at the moment.

I did the flare mock-up some time ago. Here are the fitting of the rear flares with the suspension and wheels on.

There's beén some discussion over the quality of the fiber (and steel) flares. These are from Byars, and are very nice. They fit right on with almost no modification.

Attachments

Images (1)
  • IMG_1496
Larry, that was my plan to begin with, but after cutting of the lips the fender hasn't lost much stiffness.

With the flares in place with the Clecos only, the fender is still stiffer than it was before cutting (the fiber flare are very stiff in it self), so I think I'll leave it alone.

I looked at the factory cars, and they were the same - no rolling of the edges.
Last edited by push1267
In typical fasion I tried getting as close to what the factory did to the original Gr4 cars - including how they did the attachment plates on the inner rockers. These are copies of the plates found in Les Grays factory Gr4 (thanks Ed Mendez for posting pictures of Les' car on facebook)

Sorry for the lousy quality - will take a better Picture NeXT time I'm in the workshop

Attachments

Images (1)
  • IMG_1606

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×