Skip to main content

Hi all,

I am new to the forums and looking for some help please. To save me time trawling through every post on here, I'm hoping you may be able to direct me to a previous thread or link?

I am currently restoring/converting an early left hand drive Pantera into a Group 4 race car for running in Europe. What I am after is a set of chassis dimension drawings showing pick up points, heights, lengths and widths. The car has got a slight twist in the back end and whilst it is a raw shell, having repairs done to it, it would be nice to take the twist out and put everything back to where it should be.

I am also after any period pictures of Group 4 interior, engine bay, trunk area and suspension. This will all help building the car as an authentic recreation of the cars as they ran in the day.

Many thanks for all your help.

Simon
Original Post

Replies sorted oldest to newest

QUOTE]Originally posted by Winning trousers:
Hi all,

I am new to the forums and looking for some help please. To save me time trawling through every post on here, I'm hoping you may be able to direct me to a previous thread or link?

I am currently restoring/converting an early left hand drive Pantera into a Group 4 race car for running in Europe. What I am after is a set of chassis dimension drawings showing pick up points, heights, lengths and widths. The car has got a slight twist in the back end and whilst it is a raw shell, having repairs done to it, it would be nice to take the twist out and put everything back to where it should be.

I am also after any period pictures of Group 4 interior, engine bay, trunk area and suspension. This will all help building the car as an authentic recreation of the cars as they ran in the day.

Many thanks for all your help.

Simon[/QUOTE]

Hi Simon.

I have some drawings.

Send me your mail.

Kjeld Pedersen
Denmark
info@servicegear.dk

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×