Skip to main content

Closed9 replies

Directional /High low Beam Switch

nhpanterageorgenhpanterageorgeFormerly Geoshanna
I've determined that my switch seemed to have overheated at one point. The Blue wire from the connector has melted some and the spade conector in the connector was blackened. So I'm in need of a new switch or sending this one out for rebuild. I've seen new switches on-line for $500.00!!!!!! I'd just might as well use hand signals or never drive at night for that price. But that makes it difficult to get her inspected.

Any help would be appreciated.

Thanks

George
Original Post

Replies sorted oldest to newest

nhpanterageorgenhpanterageorgeFormerly Geoshanna
Got my directional switch from Bill last Friday! He was very professional and informative. He explained all the faults and even sent me pictures showing the failure. It was a return spring on the contacts that actually caused both the high and low beams to be on at the same time. He also replaced a couple other parts that he thought looked worn out.

The best solution compared to buying a new switch was to send mine to Bill. It took him less than a week to get the switch back to me.

Thanks again everyone for pointing me in his direction and of course to Bill for providing such a great service to all of us!!!

George

Now I just have to find a relay for my horn to work...lol
Views: 294
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×