Skip to main content

Closed2 replies

Dumb EGR Question

Replies sorted oldest to newest

George PGeorge PAdmin.
Its disabled.

Unplug the vacuum hose from the vacuum diaphragm, stuff something inside the vacuum hose that is slightly larger than the ID of the hose to prevent vacuum from getting to the vacuum diaphragm (like a bee bee or a small ball bearing from a bicycle) and then reconnect the hose to the diaphragm. This way everything appears normal yet there is no air leaning out the motor via the leak in the diaphragm.

-G
socalcatsocalcatMember
quote:
Originally posted by George P:
Its disabled.

Unplug the vacuum hose from the vacuum diaphragm, stuff something inside the vacuum hose that is slightly larger than the ID of the hose to prevent vacuum from getting to the vacuum diaphragm (like a bee bee or a small ball bearing from a bicycle) and then reconnect the hose to the diaphragm. This way everything appears normal yet there is no air leaning out the motor via the leak in the diaphragm.

-G


Perfect!
Thanks, George.
Last edited by George P
Views: 83
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×