I have been thinking about upgrading my exhaust system. I currently have a miss matched set of mind train headers and hall big bore mufflers. I'd like to get a complete matching system and the only one I know of is Wilkinson's, but I can't find it on his web site anymore. Is he still making them? Is there any other complete system, besides stock Ansa out there?
Replies sorted oldest to newest
Pat Michal makes a nice stainless system.
I think the sets Steve made are sold out and I don’t believe he has re-stocked.
Pretty sure Dennis at Pantera performance in Castle Rock can supply the Ansa GTS headers and a stainless steel exhaust and muffler set.
Larry
Wilkenson was sold out 2 years ago. I have Hall Big Bore headers and went with Dennis' SS mufflers. Used the big bore mufflers as the basis of the connecting pipes (flange end) and had some pipes bent and TIG'd up. Looks very nice, sounds very nice.
I recently spoken to Dennis Quella at Pantera Performance. He has a very nice setup . Shoot them an email and check out their facebook videos. Sounds pretty good. Good hunting
I'm old, horsepower was not the ultimate goal for me. Sound level (quiet), appearance (OEM), and longevity were most important in my selection 10 years ago. Longevity meant selecting mufflers that didn't employ "a fibrous packing material" to deaden sound. I purchased the Hall GTS exhaust system.
An aftermarket exhaust system should meet your goals for originality, appearance, quality of construction, performance, sound level, and durability. So before I could offer guidance or thoughts it would be helpful to know your priorities. I'm sure others feel the same way.
There are options but there are no off the shelf aftermarket systems like this is a JC Whitney thing.
Here's an option from one of our sponsors, Mr.Fiat. "Original" GTS headers, whatever that means?
https://www.ebay.com/itm/De-To...060778.c100290.m3507
He wants $3,500 for each header. That's $7,000 for the pair. I suppose that he probably has the matching ANSA exhausts for something comparable but that is a presumption by me. I didn't ask.
I didn't realize they were that valuable? Who knew?
$3500 per SIDE❓❓‼️‼️
Buy the PPC Stainless headers and mufflers and have a competent shop make up the mating pipes from stainless. I am sure for a price Dennis will make the pipes up for you but they need to be fitted to the car and each car is different. and that would not cost $7000. The Ansa prices are absurd for a mild steel muffler that will rust out. Dennis has the best system for the price.
It is just Mr.Fiat that nearly doubled the original price.
Doubled? What? They were $750 a set. Where you been? 
That's a factor of 10.
Mr. Fiat must be confusing his ability to charge those prices with the guys at the Ferrari forum where they brag about how much they spent on parts. Like an ego show.
Thanks for all the replies. I had a crack in one of my big bore tail pipe flanges, and I just had that repaired. So, I am up and running again, but I will probably consider PPC's system for the future. I'll give him a call in the next couple of weeks and talk to him about it.
https://www.nouvalari.com/exha...catalogue.php?page=3
try these - they mate to P. Mical's headers and are bespoke.
