My shop is installing a Holley sniper stealth, and if all goes well will have it back this week or next. I will upload some pictures and a video if I can. I didn’t get the hyper spark system with it, but may have it installed later. I purchased my system from EFI system pro and have they have a dedicated line to call if there is any questions or problems. I heard to many stories about how hard it was to contact Holley directly. They were very helpful, and knowledgeable about a Pantera. The guy knew all the parts it would need to get the system installed properly.
Awesome. Good luck! When I get the rear end done I plan to take her to a Holley distributor who can tune it on a dyno.
Thx for info shashi27, appreciate it alot. :-)
Dmoney74, did you manage toget yours done? Any pictures and info?
cheers
chris
shashi27 your work looks nice and I am interested in the in tank fuel pump setup too. Did the engine screen ever clear the tight space between the distributor and window?
I have no installed a fuel injection made by KMS in the Netherlands, single throttle valves with stack. I have 4 option for different length of the stacks. the shortest was recommended for best engine performance. But the longest is not much worse. Just in regards to dust: which length of stacks would be good in order prevent dust getting into the stacks ? KMS does not offer standard filter for stacks. which stainless steel mesh is recommended for filtering ? any recommendation against rain at driving ?
thanks,
Uli
Attachments
Images (1)
![20210729_111127[1]](https://pantera.infopop.cc/fileSendAction/fcType/0/fcOid/1598208419960642/filePointer/20327796486411703/fodoid/20327796486411699/imageType/LARGE/inlineImage/true/20210729_111127%5B1%5D.jpg "20210729_111127[1]")