Hello , I am looking for 1or2 small Ghia Emblems whit a seperate crown.
overal size width 20 mm ( 4/5")
hight 27mm (1-1/16")
If you can help me please let me know.
Simon
Original Post
Replies sorted oldest to newest
Simon can you explain a little more please/
It sounds as if your emblem should be in 2 pieces.
I have one in steel for a pantera and a plastic later one, which would not be correct I think.
It sounds as if your emblem should be in 2 pieces.
I have one in steel for a pantera and a plastic later one, which would not be correct I think.
deniscCaretaker of 8MA1244 '70 Euro Mangusta DRIVE THEM, THEY WERE MEANT TO BE DRIVEN, IF YOU WANT TO LOOK AT ONE, BUY A POSTER!
The 2 piece badge would be from before the DeTomaso era and be metal. Here are a couple but they are a bit larger than your requested size
http://www.ebay.fr/itm/GHIA-ch...0:g:LjQAAOSwxu5ZHWSZ
http://www.ebay.fr/itm/FIAT-23...7:g:dzYAAOSwnHZYiakQ
http://www.ebay.com/itm/Fiat-G...AOSwRLZUDe2p&vxp=mtr
http://www.ebay.fr/itm/GHIA-ch...0:g:LjQAAOSwxu5ZHWSZ
http://www.ebay.fr/itm/FIAT-23...7:g:dzYAAOSwnHZYiakQ
http://www.ebay.com/itm/Fiat-G...AOSwRLZUDe2p&vxp=mtr
Peter, Denis thanks.
yes it is in 2 pieces , but they are smaller as wich are in the advertisings.
I also dont know where they are mount on , but there was missing one of the 2 on my Vallelunga.
Simon
yes it is in 2 pieces , but they are smaller as wich are in the advertisings.
I also dont know where they are mount on , but there was missing one of the 2 on my Vallelunga.
Simon
deniscCaretaker of 8MA1244 '70 Euro Mangusta DRIVE THEM, THEY WERE MEANT TO BE DRIVEN, IF YOU WANT TO LOOK AT ONE, BUY A POSTER!
Send Fred Phillips a note he is very familiar with the Vallelungas.
quote:Originally posted by Denis C:
Send Fred Phillips a note he is very familiar with the Vallelungas.
I do,
Simon