Can anyone confirm the correct overall height and pin-to-pin dimensions for the front fender Ghia badges? I measured 38mm tall and estimated 18mm center to center for the mounting pins (taken from the backside as mounted on a car) but not sure it's the original type. I see badges for sale in many sizes. I need to drill holes in fenders before car goes to paint.
Thanks in advance.
Original Post
Hi Tim -

I just measured mine - It's 38mm tall.

I couldn't get a good pin measurement inside the fender, but it looks the same as yours.

My car is a '73 L model.

Agree with Simon on the mounting, as I looked at mine, it's a little loose, and is scratching the paint due to the motion.
quote:
Originally posted by Tim S:
Can someone please confirm the correct badge as 38mm high with an 18mm pin to pin dimension? Thanks


I have one laying around with a broken locating pin I was able to measure and got the same measurements.

Attachments

Photos (1)
quote:
Originally posted by Rocky:
Hi Tim -

I just measured mine - It's 38mm tall.

I couldn't get a good pin measurement inside the fender, but it looks the same as yours.

My car is a '73 L model.

Agree with Simon on the mounting, as I looked at mine, it's a little loose, and is scratching the paint due to the motion.


Thank you Rocky, good to know.
quote:
Originally posted by LIV1S:
quote:
Originally posted by Tim S:
Can someone please confirm the correct badge as 38mm high with an 18mm pin to pin dimension? Thanks


I have one laying around with a broken locating pin I was able to measure and got the same measurements.


Great thanks!

Add Reply

Likes (0)
Post
×
×
×
×