Skip to main content

Are there any solutions? It makes it nearly impossible to recognize the profile of the CHP Crown Vic's that might be lurking nearby and I think it is a general safety hazard.

The outside mirrors offer a clear, non vibrating, vision, but I wish they could be angled out a little bit more. I have these outside mirrors if anybody can offer a suggestion on if they can be adjusted to face more outward:

http://precisionproformance.com/ep1030.htm
Original Post

Replies sorted oldest to newest

I am finding out that some people have had luck putting various rubber grommets between the mirror and windshiled to hold it steady and reduce or eliminate the vibration.

If that works, then it seems to me the mirror assembly is worn out and defective and needs to be replaced.

If that is the case, I will remove the old mirror and glue a new one its place on the windshield.
Get a Valentine 1...tells you whether the cops are in front or behind Big Grin

At least one guy I know cut his stalk in half and reversed the mirror raising it in the process for better vision and he says the vibration has gone too.

The easy alternative is a windshield mounted aftermarket mirror.
Last edited by joules
Post
×
×
×
×
Link copied to your clipboard.
×