Skip to main content

Replies sorted oldest to newest

Matg,

Thanks for replying.  I don't have a picture but I do have the following; the connector block, the bezel, the rocker, the white plastic square piece that goes inside and the copper u-shaped piece that goes over that plastic piece.  I believe I am missing a spring that goes between the rocker and the white plastic piece.  Can you confirm this?

 

 

Hi  oh boy I looked at my picture repository but that special picture is missing. As far as I can recap there was NO spring on the outer side (where B goes into A beeing hold by the 2 small side extentions). The spring mechanism comes from part C which is inserted from the back per snap in on north and south ..my brain does not provide more info unfort..hope helps a little bit

Washer Wiper switch_1

Attachments

Images (1)
  • Washer Wiper switch_1
Last edited by George P

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×