have a 351 clev 4v motor freshly rebuilt and only dyno time if interested have stats
Original Post
Replies sorted oldest to newest
How about some stats? HP,Heads etc.
It is freshly
rebuilt and has only has been run on the dyno. The corrected power is 320.2
hp at 5100 (max) and 341.7 ft/lb torque at 3700 (max) with a Holley 750 (not included).
Here are the stats:
bored .030
230-234 Comp cam
9.2:1 compression ratio
TRW small dished pistons
springs- 140lb seated/380lb open
Johnson hydraulic antipump up lifters
Harland Sharp roller rockers
3 main bearing restrictors
intake and exhaust flow plates with epoxy
flow kooler aluminum waterpump
pushrods (p/n crn5262116 from summit racing)
Offenhouser 360 single plane intake manifold
I have all the paperwork from the dyno and pictures are available. Email me
if you are interested.
rebuilt and has only has been run on the dyno. The corrected power is 320.2
hp at 5100 (max) and 341.7 ft/lb torque at 3700 (max) with a Holley 750 (not included).
Here are the stats:
bored .030
230-234 Comp cam
9.2:1 compression ratio
TRW small dished pistons
springs- 140lb seated/380lb open
Johnson hydraulic antipump up lifters
Harland Sharp roller rockers
3 main bearing restrictors
intake and exhaust flow plates with epoxy
flow kooler aluminum waterpump
pushrods (p/n crn5262116 from summit racing)
Offenhouser 360 single plane intake manifold
I have all the paperwork from the dyno and pictures are available. Email me
if you are interested.